Bruide spark plug tool is a good helper for car maintenance. To disassemble and assemble the spark plug of the engine, a special spark plug removal kit should be used, and the spark plug should be disassembled after the engine cools down.
Firstly, prepare relevant spark plug replacement kit before replacing the spark plug. Secondly, open the hood, pick up the plastic cover of the engine, then remove the high-pressure pipeline, mark the position of each cylinder to avoid confusion, and use the spark plug sleeve to take out the spark plugs one by one. In the process of installing the spark plug, put the spark plug in the spark plug hole, then twist it a few times by hand, and then use the sleeve to tighten the spark plug to avoid damage to the spark plug. Next, install the high-voltage branch line in order, and then fasten the cover plate after the installation is completed.
Before replacing the spark plug, the vehicle needs to be turned off to cool down for a period of time before replacing it. When tightening all the screws, it is necessary to control the strength to avoid the screw opening from breaking. After the installation is completed, you need to check the wiring of the ignition coil. Start the engine to see if there is any abnormality, if there is no abnormality, you can drive on the road.